Filter Capacity - Brita PURITY 450 Quell ST Mode D'emploi

6.2 Inserting the Filter Cartridge
•
•
•
•
•
•
• Switch on power supply to the terminal device (plug).
• To fl ush and bleed the new fi lter cartridge

7 Filter Capacity

By-pass and capacity table for coffee/espresso machines and vending machines
The stated capacities are guide values that, depending on the product volume fl ow, can vary and
also depend on the machine types. We will be happy to make individual recommendations!
Carbonate Hardness
in °dH (°KH)
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
28
31
35
32
Check that the O-ring seal of the fi lter cartridge
groove and also check for dirt and damage.
Note: The cartridge seat has been lubricated with food-safe lubricant at the
factory.
Check the connector seat of the fi lter cartridge O-ring
lid for dirt and damage.
1
Place the new fi lter cartridge
Stand on the kick loops
clockwise until the mantle handle
Stand on the kick loops
lid on the pressure vessel
3
lid handle must line up with the "INSERT" groove.
20
Press the pressure vessel lid
engages.
By-pass setting
50%
50%
40%
40%
40%
40%
40%
30%
30%
30%
30%
30%
30%
30%
30%
30%
20%
20%
20%
20%
20%
20%
20%
20%
20%
in the pressure vessel
2
with both feet, lift the pressure vessel
12
is over the kick loops
16
with both feet and place the pressure vessel
9
. The positioning of the arrow marking on the
1
down and turn clockwise until the lock
3
carry out the steps described under 5.3.
2
Filter capacity in litres
PURITY 450 PURITY 600
8250
8250
7028
6024
5271
4685
4217
3357
3077
2841
2638
2462
2308
2172
2052
1944
1650
1571
1500
1435
1375
1320
1179
1065
943
is correctly seated in the
2
in the pressure vessel
2
.
1
turning it
1
.
12
PURITY 1200
14100 25800
14100 25800
12011 21978
10295 18838
9008 16483
8007 14652
7207 13187
5738 10499
5260 9624
4855 8884
4508 8249
4208 7699
3945 7218
3713 6793
3506 6416
3322 6078
2820 5160
2686 4914
2564 4691
2452 4487
2350 4300
2256 4128
2014 3686
1819 3329
1611 2949
15