Important Components - EUROM Partytent heater 1500 IND Mode D'emploi


Never lay the electrical cable behind shelves or under clothing and ensure that it cannot
become trapped or cause a stumbling risk. Prevent the cable coming into contact with the
hot elements of the partytent heater.

Try to avoid the use of an extension cable. If this cannot be avoided, then choose a lead
that is as short as possible with power of at least 10A and 2000W. The cable must be
completely uncoiled if a cable-winding device is used.

Ensure that the party-tent heater never falls into water or any other fluid and never
submerse it. Never touch the device with wet hands.

Never stick your fingers, pencils or any other object into the party-tent heater grille. The
grille gets very hot during use and can only be touched when the heater has cooled down
fully.

Make sure there is close supervision if this device is used when there are children,
incapacitated persons or pets present. Do not allow children to play with the device. This
device is not suitable to be operated by children or those with physical, sensory or mental
disabilities or by anyone who does not have knowledge about or experience with the device.
Ensure that every user has ready the instruction booklet. Keep children and pets out of the
vicinity of the device.

Switch the party-tent heater off and remove the plug from the socket
- after every use of if you are leaving the location
- before moving or cleaning the device
- if it breaks down or needs maintenance

Do not use the device if it has been subject to a fall, has been damaged or is not working
properly. Switch the device off immediately, remove the plug from the socket and consult
your supplier or a qualified electrician. Please request original parts if the device needs to
be repaired. Never dismantle or repair the device, cable or plug yourself. The device does
not contain any parts that you can replace or repair yourself.
The supplier, importer and manufacturer will not be held liable if you take any actions, other
than those outlined in this booklet; the guarantee will also become null and void in this event.

IMPORTANT COMPONENTS

1. electrical cable
2. hanging chain
3. hanging eye for heater
4. control box
5. power switches & indicator light
6. protective cover
7. reflective screen
8. carbon lamps
9. grille
INSTALLATION
Mounting hardware included:
- key-bolt with hanging eye
- Standard attachment chain (40 cm.)
with screw locking and ring
- Additional security chain (25 cm.)
- 2 karabiner hooks
- 3 tie wraps
The party-tent heater must be hung so that there is 40 cm of free space between the control box
and any ceiling, tent canvas etc. The hanging chain measures 40 cm.
Additionally, at least 50 cm of space must be left at the sides, between the device and any side
walls, tent canvas and other objects. There must also be at least 1.80 m between the ground
8