Important; Safety Warnings - EUROM Partytent heater 1500 IND Mode D'emploi

THANK YOU
Many thanks for choosing this EUROM party-tent heater: You have made a very good choice! We
hope that you will be completely satisfied with the product.
In order to get the very best from your party-tent heater, we advise you to read these
instructions carefully before using for the first time. Pay particular attention to the safety
warnings. We also recommend you keep this booklet somewhere safe so that you can consult it
in the future.

IMPORTANT

 Your party-tent heater must be installed fully and fulfil all the relevant electricity regulations,
requirements and rules. If you are in any doubt, have the device installed by a qualified
electrician.
 This equipment must be connected to a fully functional, undamaged, single-phase, earthed
electrical socket which provides 230V/50Hz current. The installation must be equipped with
a 30 mA earth leakage circuit breaker.
 The plug must always be accessible when the device is connected to an electricity supply.
 Read this instruction leaflet carefully and follow the instructions.
 Before connecting the device, always check that:

the voltage to which you wish to connect the device corresponds the voltage indicated
on the specification plate.

the socket and plug correspond to one another.

the socket is earthed.

the device is hanging securely, at the right height and with sufficient free space
around it (see later in the booklet).

the electrical cable is located away from the vicinity of the heater so as to avoid it
getting too hot.

SAFETY WARNINGS


The party-tent heater must only be used in the manner for which it has been designed: as a
hanging heater for party-tents, verandas and similar covered outdoor areas in a private
setting. Never use it for other purposes such as drying clothing or textiles or other
materials/products/people or animals. The party-tent heater is not intended to be used in
commercial situations and must not be used at building sites or in greenhouses, stables etc.

The carbon heating lamps are fragile so handle the party-tent heater with care. Avoid
bumping the device, letting it fall etc.

This party-tent heater must be installed according to the guidelines outlined later in this
booklet.

The party-tent heater emits a very intense heat. Do not expose people (particularly old
people or children) to direct heat. This also applies to animals.

The party-tent heater should never be installed or used in the vicinity of flammable objects.
This may include curtains, furniture, tent canvases etc. It may not be located too close to a
socket and should not be used in a damp area such as a bath/shower room, by a swimming
pool etc.

Never use the partytent heater in spaces which house explosive or flammable items.

In order to reduce the risk of electrical shock or fire, the party-tent heater should never be
used with a timer or another device that switches the device on or off automatically. Never
leave the device unsupervised during use.

Never cover the party-tent heater! Never hang anything over it!

Ensure that the electrical cable is laid without any kinks. If the cable comes into contact with
parts of the heater or falls within the range of the radiation, it could melt. This poses a
serious fire risk!
7
EN