Practical Cooking Advice; Programming Cooking - SCHOLTES BCG 199D P 0 Mode D'emploi

icon lit up on the display indicates that the Main Space has been selected and
that it is therefore possible to adjust the Main Space settings.
3. Press the "P" button. The display shows:
AUTOMATIC
UNIVERSAL
MY RECIPES
with the first option selected (white text on a black background).
4. Use the or buttons to select the desired option and confirm by pressing
"OK". The display will then show the list of cooking programmes.
5. Use the or buttons to select the desired cooking programme and
confirm by pressing "OK".
6. Press the "START/STOP" button to begin cooking.
7. The oven will begin its preheating stage.
8. When the preheating process has finished, a buzzer sounds show that this
stage has been completed:
9. The black text on a white background is used to indicate which cavity is in
use. To modify the settings of the other cavity, press the
cooking it is always possible to:
- modify the temperature by pressing the "°C" button, adjust the figure using
the and buttons and confirm by pressing "OK" (for UNIVERSAL cooking
modes only);
- set the cooking duration (for UNIVERSAL cooking modes only);
- stop cooking by pressing the "START/STOP" button;
- Set the timer by pressing the "MENU" button;
- switch off the oven by pressing the
10. If a blackout occurs while the oven is already in operation, an automatic
system within the appliance will reactivate the cooking mode from the point at
which it was interrupted, provided that the temperature has not dropped below
a certain level.
Programmed cooking modes which have not yet started will not be restored
and must be reprogrammed.
My recipes
The MY RECIPES function can only be activated for UNIVERSAL cooking
modes, and modes for which a duration has been set.
The recipe is only stored in the memory of the appliance once the cooking
cycle has ended.
A set number of procedures with different temperatures and durations may
be stored (10 in total), if at least one minute passes between one procedure
and the next. A maximum of 10 cooking programmes may be stored for the
EXTRALARGE SPACE, 3 for the SMALL SPACE and 3 for the MAIN SPACE.
You may also select the memory slot you wish to use. When the divider is
inserted and if two UNIVERSAL cooking programmes are taking place at the
same time in the two separate cavities, it will not be possible to store either
cooking cycle in the memory of the appliance.
In order to differentiate between saved recipes so that it is easier to search
the list, the name under which each cooking cycle will be saved consists of:
- MY RECIPE + progressive number (1, 2, 3, etc.)
- INITIAL TEMPERATURE + SYMBOL (IF AVAILABLE)* (e.g. 170°C)
- DURATION (e.g. 00:30)
* Meaning of the symbols:
- no symbol: the initial temperature was set and remained unchanged;
-  : the initial temperature was only decreased;
-  : the initial temperature was only increased;
-  : the initial temperature was both increased and decreased.

Programming cooking

Programming is possible in all oven configurations: EXTRALARGE, MAIN
and SMALL SPACE, even if the latter two are being used simultaneously.
Programming the duration
button. During
button.
! Only the duration of UNIVERSAL cooking programmes may be set.
! Programming may also take place before a cooking cycle is begun, using
the "START/STOP" button.
1. Press the selector button ; the DURATION option will appear on the
display.
2. Adjust the value using the and
3. Press the "OK" button to confirm.
4. Press the "START/STOP" button to activate the programmed process.
5. When the cooking time has elapsed, a buzzer sounds and the oven
switches off.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed. The programme will stop automatically at 10:15 a.m.
Programming delayed cooking
! A delayed cooking programme may be scheduled when setting the duration.
! A cooking mode must be selected - but not started - before programming
can take place.
1. Follow steps 1 to 2 to set the duration as detailed above.
2. Select the END COOKING option using the
3. Adjust the value using the and
4. Press the "OK" button to confirm.
5. Press the "START/STOP" button to activate the programmed process.
6. When the cooking time has elapsed, a buzzer sounds and the oven
switches off.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed, while the end time is set to 12:30. The programme will
start automatically at 11:15 a.m.
The message WAITING shows that a programme has been scheduled. The
display shows the cooking end time and the cooking duration alternately.
The cooking duration and end time may be modified while the oven is waiting
to start, by following the procedure detailed above.
To cancel programming, switch the oven off

Practical cooking advice

MULTILEVEL
• Use positions 1, 3, 5 and 6.
• Place the dripping pan at the bottom and the rack at the top.
• When cooking pizzas or focaccia breads, use a lightweight aluminium tray
with a maximum diameter of 30 cm, placing it on top of the rack supplied.
If the pizza has a lot of toppings, we recommend adding the mozzarella
cheese to the top of the pizza halfway through the cooking process. During
the cooking process, it is advisable to change the order of the shelves.
PIZZA or FOCACCIA
• Use a light aluminium tray with a maximum diameter of 30 cm, placing it
on top of the rack supplied.
• If the pizza has a lot of toppings, we recommend adding the mozzarella
cheese on top of the pizza halfway through the cooking process.
buttons.
button.
buttons.
.
35
GB