SOLIS 698 Mode D'emploi page 67

S E T TI NG T H E A U TO MA T IC E CO MODE
■ ■
• When you press the ECO mode button, you switch to the energy saving and
automatic ECO mode. The display states ECO.
• In ECO mode, the set room temperature is fixed to 22 °C, it can not be changed.
• If the current room temperature is below 18 °C, the appliance works at high
heating power in ECO mode. The corresponding symbol
control panel.
• If the current room temperature is between 18 °C and 22 °C, the appliance
works at low heating power in ECO mode. The corresponding symbol
up in the control panel.
• Once the room temperature has reached 22 °C, the appliance switches to stand­
by mode. The display constantly shows the current room temperature.
NOTES:
• In ECO mode, neither the heating power nor the desired room temperature
can be set.
• You can, however, set the timer in ECO mode to determine operating time.
M EM OR Y F U N CT IO N
■ ■
• If you have not disconnected the appliance from the power grid and/or switched
it off with the power flip switch and then switch it on again with the
without making any other settings, the appliance works in the last saved set­
tings. Only the timer function is not saved, meaning operation time is not set.
• If the appliance was disconnected from the power grid or switched off with the
power flip switch, the last saved settings are deleted. The appliance will start
in low heating power with a standard temperature setting of 25 °C once it is
reactivated.
FO R YO UR IN F O RMA T IO N
■ ■
• After approx. 1 minute, the illumination of the function lights in the control
panel and the display is dimmed resp. reduced by one third. This prevents the
lights from affecting your sleep at night. Each time the appliance is operated
and the buttons are pressed, the LED lamps light up in the highest brightness.
lights up in the
lights
;
button
67