SOLIS 698 Mode D'emploi page 64

STA RT I N G U P
s
• Place the appliance upright on a dry and stable surface near a power socket.
Place the appliance in such a way that it can not be knocked over and nobody
trips over the power cord.
• Plug the power plug into a suitable wall outlet.
S W IT C HI N G TH E A P PL I A N CE O N
■ ■
1. Set the power flip switch on the appliance back side to „I". A signal sound
can be heard twice and the symbol
the appliance is now in standby mode. You can now activate the appliance by
pressing the ON / OFF button
CAUTION: When in standby mode, the heater will only react if you press the
;
button. All other buttons are operable only after the appliance has been activated
;
with the button.
NOTE: To turn the appliance off again, press the
will count down from 10 to 0, then the appliance is switched off and returned to
standby mode.
2. Once the appliance has been switched on, the
ing power as well as the current room temperature with the symbol „°C" to its
right side light up.
A D J US T IN G HE A T IN G P O W ER
■ ■
1. With the button, you can adjust heating power.
2. Low heating power is the standard setting after activation. If you press the
button, the appliance will work on high heating power. Pressing the button
again will switch back to low heating power. The control panel will always dis­
play the corresponding symbol:
low heating power
high heating power
CAUTION: In ECO mode you can not adjust heating power, here, the heating
power automatically adapts to the current room temperature.
64
;
lights up in the display to indicate that
;
in the control panel.
;
button once more. The display
symbol indicating low heat­