Cleaning And Maintenance - SOLIS 698 Mode D'emploi

C LE AN I N G A N D MA I NT E NANCE
s
■
• Disconnect your appliance from the power grid before every cleaning and let it
cool down completely.
• Clean the appliance chassis with a slightly wet towel.
• Keep pointed and sharp objects away from the appliance to prevent any dam­
age.
• Never use scouring or aggressive detergents, just as you should never use ace­
tone or alcohol.
• Never submerge the heater in water or bring it into contact with water in any
other way.
• From time to time, clean the protective grid and the filter of the air inlet on the
appliance back side. You can remove the protective grid by pushing the latches
down and pulling the grid away. The filter, which is positioned in the frame of
the protective grid, can be removed and cleaned under running water with a
little dishwashing liquid. The same applies to the protective grid. Let both parts
air dry completely before placing the filter back in the protective grid and fixing
it to the hooks. Remount the protective grid with the filter to the appliance
backside, locking it into place.
71