Table des Matières
Publicité
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
•
This unit requires ½" hot and cold supply lines
(not included).
•
This unit includes a cutout template,
which must be used. Custom installations
may require additonal parts which cannot be
furnished by Hansgrohe.
•
This unit must be completed with a trim kit. The
handshower must be installed.
4
15 - 75 psi
145 psi
10° - 140° F*
176°F*
approx. 5.8 gpm
"
•
•
•
•
Protection against back siphonage is provided by
a check valve (included with the trim kit) and by
an automatically resetting diverter (included with
the trim kit).
If the trim kit to be used includes a
baseplate, such as models 34445xx1,
39452xx1, 39456xx1, this rough
must be installed with mounting plate
39449001 (not included).
To insure proper fit of the trim, the surface mate-
rial (tile, etc) must be installed prior to installation
of this rough.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicité
Table des Matières
