Specifications; Sound Bar - Sony HT-CT60BT Mode D'emploi

Specifications

Formats supported by this system
Digital input formats supported by
this system are as follows.
Format
Dolby Digital
Linear PCM 2ch 48 kHz
or less

Sound Bar

Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 230 - 20,000 Hz; rated
6 Watts per channel minimum RMS
power, with no more than 1 % total
harmonic distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 7 W + 7 W
(at 4 ohms, 1 kHz, 1 % THD)
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Inputs
ANALOG
OPTICAL
COAXIAL
BLUETOOTH section
Communication system
BLUETOOTH Specification
version 2.1 +
EDR (Enhanced Data Rate)
26
US
Supported/Not
supported


Output
BLUETOOTH Specification Power
Class 2
Maximum communication range
Line of sight approx. 10 m
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution
Profile)
Supported Codecs
*4
SBC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling
frequency 44.1 kHz)
*1
The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software
application, etc.
*2
BLUETOOTH standard profiles
indicate the purpose of BLUETOOTH
communication between devices.
*3
Codec: Audio signal compression
and conversion format
*4
Subband Codec
Front speaker unit
Speaker system
2-way speaker system, Acoustic
Suspension
Speaker unit
Woofer: 25 mm × 120 mm (1 in ×
4 3/4 in)
Tweeter: 38 mm (1 1/2 in)
cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
On: 20 W
Standby mode: 0.5 W or less
*1
*2
*3