Control - Sony HT-CT60BT Mode D'emploi

again. However, you must repeat
pairing in the cases listed below.
– Pairing information is deleted by
repairing the system.
– Pairing for 9 or more devices is to be
set.
This system can set pairing with up
to 8 devices. If pairing is to be set on
a device after pairing has been set
on 8 devices, the pairing information
on a device whose connection date
is the oldest is overwritten with new
information.
– The connection history with this
system is deleted on the connected
device.
Pairing manually
If you intend to pair the system with 2
or more BLUETOOTH, manual pairing
is necessary.
1
Place the BLUETOOTH device to
be connected to this system
within 1 meter (3.3 feet) of the
system.
2
Press PAIRING on the remote

control.

3
Perform steps 3 to 6 in "Pairing
automatically" (page 17).
Notes
 "Passkey" may be called "Passcode,"
"PIN code," "PIN number" or
"Password," etc., depending on the
device.

The pairing standby status of the
system is canceled after about 5
minutes. If pairing is not successful,
redo the procedure from step 1.

If you wish to pair with several
BLUETOOTH devices, perform the
procedure from steps 1 to 3 individually
for each BLUETOOTH device.
18
US

If no pairing information is stored in
the system, the system automatically
enters pairing mode when
"BLUETOOTH" is selected as input. In
this case, pairing mode is not released
automatically.
One-touch connection with
a smartphone (NFC)
By touching the system with a
smartphone, the system is paired and
connected with the smartphone via
BLUETOOTH, and turns on
automatically.
NFC
NFC (Near Field Communication) is a
technology enabling short-range
wireless communication between
various devices, such as mobile
phones and IC tags. Thanks to the
NFC function, data communication
can be achieved easily just by
touching the relevant symbol or
designated location on NFC
compatible devices.
Compatible smartphones
Smartphones with the NFC function
built-in
(OS: Android 2.3.3 or later, excluding
Android 3.x and 4.x)
1
Download and install the app
"NFC Easy Connect."
"NFC Easy Connect" is a free
Android app you can download
from Google Play. Download the
app by searching for "NFC Easy
Connect" or access it by using the
following two-dimensional code.
Fees may be charged for
downloading the app.
Use a two-dimensional code
reader app.