Schulthess wmi 100 Notice D'installation page 39

I NSTA L L AT I O N P L A N
Electrical connection
1
Water connection:
2
Warm water or
cold water hard
-
Water connection:
3 5
Cold water hard or soft
Overflow / Ventilation
6
Connection for liquid detergents
7
Minimum size
8
Adjustable feet
9
Plinth (Option / three types)
10
* Deviating dimensions:
see installation plan no. 305 612
Fixing set
11
Main switch
12
Power rating plate
13
Steam indirect, Feed
14
Steam direct, Return
15
Steam direct
16
For steam heating:
17
Control air (Standard)
Control water (Option)
Control water, return
18
Drain tube
19
Flexible as per the connection diagramm
Mains locking option.
Connection: ¾"- DN 20, 1 - 10 bar, max. 70 °C, 15 -31 l / min
Connection: ¾"- DN 20, 1 - 10 bar, max. 70 °C, 15 -31 l / min
No connection required.
Keep opening free to ensure appliance ventilation
14 direct connections (If required drill out: ø 4 mm)
50 mm on both sides of the machine
In the event of an uneven floor, level machine with a spirit level
- Base without integrated function
- Base with integrated water recovery *
- Base with integrated mop module *
The machine feet must be screwed down..
Lockable in position «OFF».
Connection: ¾", 1 - 13 bar
Connection: ¾", Condensed water drain provided by the customer.
Connection: ¾", max. 13 bar
Connection: ¼", 4 - 10 bar
Connection: ¼", 4 - 10 bar
Discharge in the drain provided by the customer.
ø 75 mm
1 13
12
6
Consumption 10 kg machine: 18 - 21 kg / h
Consumption 13 kg machine: 23 - 27 kg / h
Consumption 16 kg machine: 29 - 34 kg / h
Consumption 10 kg machine: 18 - 21 kg / h
Consumption 13 kg machine: 23 - 27 kg / h
Consumption 16 kg machine: 29 - 34 kg / h
2 3 4 5
ENGLISH
6
7
39