Calling Up The Memory - visocor OM40 Mode D'emploi

Operation of the device
Important:
Irregular, double or absent pulse signals may be
an indication of cardiac arrhythmia.
The inflation and measuring procedure can be
discontinued by pressing the Start/Stop button.
The device stops inflation, deflates the cuff and
switches off.
Before measurement take a deep breath and re-
lax. Do not move, do not talk and do not tense
your arm during measurement. Breathe calmly.
Constant repetition of measurements can bring
about congestion and thus lead to incorrect
results. Between measurements take a break of
at least 3-5 minutes.

4. Calling up the memory

The device has a memory which makes it
possible to display the last 30 blood pressure
levels measured. If you press the memory
button, the last figure measured appears
(MR30). If you press again, you can call up
the previous 29 measurements (MR29, MR28
... MR1) one after the other.
After the 30th measurement the oldest
measurement is deleted and replaced by the
current measurement.
Record the figures saved in your blood pressure
pass. Over a lengthy period this will provide you
with a better picture of your blood pressure
situation, which you may wish to discuss with
your doctor.
C
GB-37