Intended Use - Mobicool MVA Notice D'utilisation

MVA (TC36)
 If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine.
Otherwise you may discharge the battery.
 The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
 Do not use electrical devices inside the cooling device unless
they are recommended by the manufacturer for the purpose.
 Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
 Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation
on all four sides of the cooling device. Keep the ventilation area
free of any objects that could restrict the air flow to the cooling
components.
Do not place the cooling device in closed compartments or
areas with none or minimal air flow.
 Ensure that the ventilation openings are not covered.
 Do not fill the inner container with ice or fluids.
 Never immerse the cooling device in water.
 Protect the cooling device and cables against heat and moisture.
 The device shall not to be exposed to rain.
2

Intended use

The cooling device is intended to be used in household and similar
applications such as
 staff kitchen areas in shops, offices and other working environments
 farm houses
 clients in hotels, motels and other residential type environments
 bed and breakfast type environments
 catering and similar non-retail applications
The cooling device is suitable for camping use.
This product is only suitable for the intended purpose and application in
accordance with these instructions.
EN
Intended use
11