Spypoint BF-6 Manuel D'utilisation page 7

Système de surveillance photographique
Masquer les pouces Voir aussi pour BF-6:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
This dial allows to adjust the sensitivity of the detector. The
camera is equipped with a detector sensitive to infrared. The
system will only detect a heat source in motion. The greater
the mass of heat, the more sensitive the system is. The range of
detection is between 5 and 50 feet. The best way to adjust the
distance is to set the camera in SET/TEST mode. Make sure to
have the least possible objects in front of the camera during the
positioning. This prevent pictures being taken by the camera
when oriented towards the sun while an object moves in front
of the camera (e.g. a branch).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera OFF and connect the USB cable (supplied)
from the camera to your computer. The computer will recognize
the camera and install the software itself. Click on "My
Computer" and select "Removable Disk". Then click "DCIM"
and "100DSCIM" to find all your photos and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TROUBLESHOOTING
No person/ animal on photos
1.
Rising sun or sunset can trigger the sensor. Camera
must be re-orientated.
2.
At night, motion detector may detect beyond range
of the IR illumination. Reduce distance setting.
3.
Small animal may trigger the unit. Reduce distance
setting and/or raise height of camera.
4.
Motion detector may sense animals through foliage.
5.
If person/animal moves quickly, it may move out
of the camera's field of view before photo is taken.
Move camera further back or redirect camera.
6.
Make sure the mounting post or tree is stable and
does not move.
Red light in front of camera blinks
• MODE switch is in SET/TEST.
• MODE switch is in PHOTO or VIDEO. The red light
in front of the camera flashes for 60 seconds to allow
the user to leave without being photographed or
recorded.
The camera screen turns off
The camera may be set to PHOTO or VIDEO mode and
the screen turns off after a period of 60 seconds in order
to preserve battery life. To return to the screen, turn off the
camera and turn it on again.
OPTIONS
To obtain more information on the available options, go to
www.spypoint.com. The following items are options which
can be added to this SPYPOINT
SD Memory card, SD-8GB
SDHC memory card 8GB High speed
Class 6.
Multi-card reader RD25-1
USB
Compatible with most memory cards (SD,
CF, MS, MMC, MS, XD...)
Picture viewer, PV-2.4
Digital camera with 2.4" viewing screen,
2GB internal memory and compatible
with SD cards. MP4 video and JPG
picture viewer. FM radio and MP3 music
player. Headphones, USB and RCA
cables, rechargeable lithium battery, AC
charger and carrying case included.
Photo and video viewer, PV-9
Photo and video viewer. 2.5" viewing
screen.
®
camera:
Multi-card
reader
all-in-one.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S-bf-6D6

Table des Matières