Titan 264 001300 Série Traduction De La Notice Originale page 29

Tensioning
Press the right switch-on key with the thumb of
your right hand. The key is caught, until the
tensioning is finished. The staff can interrupt
the tensioning by pressing the red key on the
right side.
Sealing
Use the thumb of your right hand to press the left
switch-on key until the sleeve is closed and the
band is cut.
The unit then releases the seal. Hold the end of
Band cut with your left hand and press the
Lifting lever and the compressed air motor.
To be sure that the unit formed a clean seal,
check the strapping thoroughly.
The following picture shows a correctly carved seal.
Check the seals regular:
for crackings on the sleeve
and
for neat cutting edges.
MAX-L
H 264 EU 25/12
29 / 53