EUROM SANI-COMFORT 400 Manuel D'utilisation page 15

Technical data
Type
Supply Voltage
Capacity
Protection class
Thermostat
Dimensions panel cm
Dimensions total
Weight
General safety instructions
The Sani-Comfort 400 may only be used when suspended
Never use it standing or lying down!
Make sure there is plenty of room around the convector,
1. Lesen Sie dieses Handbuch vor der Benutzung sorgfältig
durch. Bewahren Sie dieses Handbuch zum späteren
Nachschlagen auf.
2. Before using your new heater, check it, including cord and
plug, for any visible damage. Do not use a damaged
heater, but send it back to your dealer for replacement.
3. Do not use the heater until it is been fully installed in
accordance with the instructions under the heading
'Description and Installation'.
4. This heater is strictly intended for normal domestic use.
Only use it for the additional heating of your home.
5. Under the terms and conditions described in this leaflet, the
heater can be used in wet or damp indoor spaces such as
bathrooms and laundry rooms (IPX4). Do not place the
heater in the vicinity of taps, bathtub, shower, pool,
fountains or other sources of moisture (↔ > 0,6 m.). Make
V / Hz
Watt
cm
kg
Important!
on the wall
see 'Description and Installation'.
English
Sani-Comfort 400
220-240 / 50
400
IPX4
+
84,5 x 46,5 x 0,5 (4)
84,5 x 48 x 13
8,1
15