General Instructions: Maintenance And Care; Binoculars Case; Cleaning Your Binoculars; Cleaning The Objective And Eyepiece Lenses - Minox BN 7x50 DCM Mode D'emploi

pressing the memory button. When the time has been
set, press the On / Off button (10) once and you will see
„WATCH" and the time in the display. Turning the mode
dial to the right will bring you to the initial „CMP" menu.
General instructions:
Maintenance and care
Even though these binoculars are protected by a robust,
weather-proof and non-slip rubber armoring, we recom-
mend following these maintenance and care tips for you
to enjoy as many years of unlimited viewing pleasure
with your MINOX binoculars as possible.
Binoculars case (included in delivery)
To provide as much protection as possible for your
MINOX BN 7x50 DC/DCM, it is strongly recommended
to use the neoprene case when storing your binoculars.
Cleaning your binoculurs
Remove dirt and dust with a soft moist cloth. If your
binoculars have been exposed to salt water, thoroughly
rinse them off with warm water and dry carefully as
saltwater can be aggressive to the lenses of your MINOX
50
BN 7x50 DC/DCM, detrimentally affecting their optical
quality.
Cleaning the objective and ocular lenses
Contamination through foreign bodies (like sand or
dust), grease, water drops or finger prints reduce the
image quality (sharpness and contrast) of your MINOX
binoculars. Foreign bodies should be carefully removed
using a very soft brush before cleaning the lenses. To
avoid damage to the lens surfaces, it is strongly advis-
able to use specially developed optical cleaning materi-
als to remove fingerprints, grease etc. from the lenses.
We recommend using our MINOX optical cleaning set
(order nr. 69731).
Serial number
The serial number can be found on the underside of your
MINOX binoculars. It is advisable to write this number in
your instruction booklet or sales receipt for easy access
in case your binoculars get lost or stolen.