Thermometer (Temp); Selecting Temperature History; Digital Stopwatch (Timer); Stopwatch Settings - Minox BN 7x50 DCM Mode D'emploi

Fig. 10

Thermometer (TEMP)

Turning the mode dial to the right will now bring you to
the thermometer menu item. The readings of the ther-
mometer in your MINOX BN 7x50 DCM can be displayed
either in Celsius (°C) or Fahrenheit (°F). The temperature
range in degrees is from –20°C to 55°C or 4°F to 131°F.
Select the desired unit of measurement (°C) or (°F) by
pressing the navigation buttons (3) either up or down.

Selecting temperature history

An automatic recording of the temperatures occurs
every ten minutes but is displayed in units of two hours
in the bar diagram. Turning the mode dial to the right
will bring you to the temperature history reading. In the
display, you will see a bar diagram of the present (the
bar at the far right) and the last four readings from right
to left of the previous 2, 4, 6 or 8 hours respectively.
The temperature history in intervals can be viewed by
pressing the navigation buttons (3) up or down.
48
Fig. 11
The bar diagram serves to graphically display tempera-
ture changes over a period of the previous 8 hours.

Digital stopwatch (TIMER)

Turn the mode dial to the right to enter the stopwatch
mode. Your MINOX BN 7x50 DCM is equipped with a
digital stopwatch with a split time function. The hours,
minutes, seconds and tenths of a second can be meas-
ured and saved in up to 3 split time memory slots.
Stopwatch settings: Start, stop, save and delete
In the stopwatch mode, you will see „TIMER 0.00.00.0"
in the display. By pushing the Up button (3), the time
Fig. 12