Attaching The Objective Lens Caps; Inserting And Changing The Battery; Binocular Settings; Interpupillary Distance Adjustment - Minox BN 7x50 DCM Mode D'emploi

Attaching the objective lens caps

It is advisable to use the objective lens caps to further
protect your BN 7x50 DC/DCM from foreign bodies like
rain, saltwater, dust or sand. These can be attached by
simply pulling the tongues over the tripod mounting
thread cap (7) and manoevering them until properly
secured under the cap. When using your binoculars, the
caps will now hang away from the objective lenses and
not get in the way. If you would like to remove the lens
caps from the binoculars, carefully pull the tongues out
and over the tripod mounting thread and cap.

Inserting and changing the battery

Your MINOX BN 7x50 DC/DCM possesses a digital
compass which requires a CR2 lithium battery. To insert
and change the battery, please follow the next steps:
1. Open the battery compartment lid (5) by turning it
counter-clockwise.
2. Remove the battery from the battery compartment
(4) and dispose of at the appropriate collection point
for old batteries.
3. Insert the new battery (CR2), taking the +/- poles
into consideration; (+) towards the eyepieces.
4. Close the battery compartment by turning the lid (5)
clockwise. Make sure that the lid is firmly in place to
ensure watertightness.
38
Fig. 1
Important note: If the battery is removed or re-
placed, you will have to reset the various functions
of your digital compass (watch, actual altitude, etc.).

Binocular settings

Before using your MINOX BN 7x50 DC/DCM, the bin-
oculars should be set in accordance to your personal
needs. To do this, please follow the next steps carefully.

Interpupillary distance adjustment

Your MINOX BN 7x50 DC/DCM binoculars are hinged in
the middle to allow for an individual compensation of
interpupillary distances. Your binoculars are adjusted
Fig. 2