Yamaha Motor Ultramatic GRIZZLY 660 Manuel Du Propriétaire page 92

1. Lever
2. On-command four-wheel drive switch "2WD"/"4WD"
1. Levier
2. Contacteur de commande du mode de traction "2WD"/"4WD"
1. Palanca
2. Selector de tracción en las cuatro ruedas "2WD"/"4WD"
On-command
"2WD"/"4WD"
To change from 2WD to 4WD, stop the ATV, and
then set the switch to "4WD". When the ATV is in
4WD, the 4WD indicator "
speedometer unit display.
To change from 4WD to 2WD, stop the ATV, be
sure the lever is set to position a, and then set the
switch to "2WD".
4-29
four-wheel drive
" will come on in the
switch