Front And Rear Shock Absorber Adjustment - Yamaha Motor Ultramatic GRIZZLY 660 Manuel Du Propriétaire

1. Spring preload adjusting ring
2. Position indicator
1. Anneau de réglage de la précontrainte de ressort
2. Indicateur de position
1. Anillo de ajuste de la precarga del resorte
2. Indicador de posición

Front and rear shock absorber adjustment

The spring preload can be adjusted to suit the rid-
er's weight and riding conditions.
NOTE:
_
When adjusting the rear shock absorbers, the rear
wheels need to be removed. (See pages 8-113–
8-115 for removal and installation procedures.)
_
Adjust the spring preload as follows.
To increase the spring preload, turn the adjusting
ring in direction a.
To decrease the spring preload, turn the adjusting
ring in direction b.
NOTE:
_
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
_
Standard position: B
A - Minimum (soft)
E - Maximum (hard)
4-55
EBU01312