sylvac WORK BASIC Mode D'emploi page 9

5. Re-initialising the instrument
E
All settings (unit and measuring direction) will remain after a battery change. The initial instrument settings can be restored
at any time by a prolonged press (>4 sec) on button until the message rESEt is displayed.
6. Personalising the instrument
Access to the functions of your instrument can be personalised, for more information see manufacturer's website (requires
you to connect your instrument via a Proximity or Power RS / USB cable).
It is possible to activate or deactivate the required functions
7. Connecting the instrument
The instrument can be connected to a peripheral via a Proximity (RS or USB) or power (RS or USB) cable. See page 3 for
connecting the Power cable.
Measured values can be transmitted and the instrument driven using predefined retro-commands (see chap. 8 for a list of
the main commands).
9