Denon DP-30L Instructions D'utilisation page 10

NAME OF PARTS AND FUNCTIONS
Power switch
( 1 )
Turns the power ON (
Speed selection button (Start button at the same
( 2 )
time)
When this button is pressed, the speed is selected, the
platter starts protation and at the same time the arm
lifter lowers. Press buttons,
"33" for record at 33-1/3 rpm
"45" for record at 45 rpm.
Speed control knob
( 3 )
Turn this knob left or right to vary speed.
Strobe viewing window
( 4 )
Minitor flow of strobe pattern while adjusting the speed.
) and OFF ( ).
Stop button
( 5 )
Press this button, and the arm lifter ascends and the
motor stops. Because of inertia, the platter continues ro-
tation for a while before it stops.
Anti-skating knob
( 6 )
In playback of record, an attraction force toward inside
of record is introduced at the stylus. This force is varied
by adjustment of this knob. Refer to page (14) for ad-
justment.
Counterweight
( 7 )
The stylus force applied to the cartridge is adjusted by
this weight. Refer to page (14) for adjustment.
9