Hach Flo-Tote 3 Manuel D'utilisation De Base page 11

Figure 7 Sensor location near a junction
1 Acceptable upstream sensor location
2 Acceptable downstream sensor location
Attach the desiccant hub (FL900)
Attach the desiccant hub to the FL900 flow logger to give strain relief to the sensor cable and the
connector. Refer to Figure
For the best performance, make sure to install the desiccant container vertically with the end cap
pointed down. Refer to
8.
Figure 8.
3 Distance downstream: 10 × pipe diameter
4 Distance upstream: 5 × pipe diameter
English 11