Install The Software - Hach Flo-Tote 3 Manuel D'utilisation De Base

Figure 8 Attach the desiccant hub
1 End cap
Connect to a flow logger
Connect the sensor cable to a FL series flow logger. Refer to the flow logger documentation for
instructions.
Sensor installation hardware
Attach the sensor to the installation hardware. Then install the installation hardware in a pipe or
channel. Different installation hardware is available for sensor installation in different pipe sizes and
shapes. Refer to Replacement parts and accessories
the documentation supplied with the installation hardware for installation instructions.
The installation hardware options follow:
• Spring band—Circular metal band that stays in place by spring action against the pipe walls.
Available for pipe diameters of 6 to 19 inches.
• Scissors-jack band—Circular metal band that stays in place when a scissors jack is tightened.
Available for pipe diameters of 16 to 61 inches.
• Partial bands—Metal band that covers the bottom half of a channel and stays in place by
attachment to the channel wall.
• Rectangular channel mount—Metal plate that stays in place by attachment to the channel.
Operation
For sensors connected to an FL900 flow logger, connect a computer with
to the flow logger to configure, calibrate and collect data from the sensors. Refer to the
Desktop documentation to configure, calibrate and collect data from the sensor.
For sensors connected to an FL1500 flow logger, refer to the FL1500 flow logger documentation to
configure, calibrate and collect data from the sensors. As an alternative, connect a computer with
DATA Desktop software to the flow logger to configure, calibrate and collect data from the
FS
sensors. Refer to the
the sensor.

Install the software

Make sure that the latest version of the
Download the software from http://www.hachflow.com. Click Support, then select Software
Downloads>Hach FL Series Flow Logger.
12 English
DATA Desktop documentation to configure, calibrate and collect data from
FS
DATA Desktop software is installed on the computer.
FS
on page 16 for ordering information. Refer to
FS
DATA Desktop software
DATA
FS