Lindy 38143 Manuel Utilisateur page 9

User Manual
Matrix
The Matrix menu allows you to easily set the
Input/Output combination you require using a simple
graphical interface, simply set the Input value for
each Output individually.
1. Displays which Input is being used on each
Output
2. Click to select an Input for that Output
3. Click to select the previous or next Input for that Output
FW Upgrade
Please contact LINDY support for information on upgrading the Firmware of this product.
Trouble Shooting

Check that the HDMI source and display are both powered on and active.

Power off all the devices, then power on in this order: first, the HDMI source(s), followed by the Matrix
Unit, then the Receiver units and finally the display(s).

Please check all cable and power supply connections are made correctly

Please check that the dip switches on the side of the receivers are set to the correct setting for the
length of CAT. 6 cable you are using.

Check that the Lock LED is illuminated, if it is not please try a shorter or better quality CAT. 6 UTP
cable

If the Lock LED is illuminated and no picture is received please try a different HDMI Input on the Matrix.
If this is successful please use the same EDID setting for both of these inputs and then retry.
English