User Manual
Operation
EDID
The Matrix is capable of using either preset or cloned EDID
data to ensure maximum compatibility. The table shows the
different EDID values which can be set using the Matrix's
front panel buttons or using the supplied software via RS-
232 or TCP/IP.
Using the buttons on the front of the Matrix, press Menu to
enter the EDID Management Window. Press Up or Down
until you get to the EDID value which you want to set and
then press Enter. Now use Up or Down to scroll to the Input
you want to apply the EDID to and then press Enter again.
IR Control
The Matrix supports bi-directional IR signal extension, allowing control of the HDMI sources remotely from
the Receiver and displays remotely from the Matrix, simply install the supplied IR Receivers and Emitters
according to your requirement.
Each of the IR TX ports (1 – 4) located on the back of the Matrix unit is allocated to the corresponding
HDMI Input (1 – 4), this allows you to control whichever HDMI source you are viewing from a remote
location even after switching between inputs.
Each of the IR RX ports (1 – 4) located on the back of the Matrix unit is allocated to the corresponding
HDMI Input (1 – 4), this allows you to control the HDMI display(s) currently using this Input.
Please Note: Misplaced or poorly secured IR Emitters and Receivers may result in intermittent IR control
signals passed to and from the matrix. Check your placement and adjust if necessary.
PC Controller
The Matrix can be controlled by a Windows PC connected via RS-232 (9 Way) cable or via a LAN using
TCP/IP.
Begin by connecting the PC and Matrix by your preferred method and then switch the Matrix on.
Download the latest version of MatrixController.exe from www.lindy.com and then open it by double
clicking on it.
When you open the software you will be presented with the screens shown on the following page, you
can now begin to configure the Matrix according to your requirement.
EDID Mode
EDID Description
1
1080i, 2CH AUDIO
2
1080i, DOLBY/DTS 5.1
3
1080i, HD AUDIO
4
1080p, 2CH AUDIO
5
1080p, DOLBY/DTS 5.1
6
1080p, HD AUDIO
7
3D,1080p, 2CH AUDIO
8
3D, 1080p,DOLBY/DTS 5.1
9
3D,1080p, HD AUDIO
10
4k*2k, 2CH AUDIO
11
4k*2k, DOLBY/DTS 5.1
12
4k*2k, HD AUDIO
13
DVI 1024x768
14
DVI 1920X1080
15
DVI 1920X1200
16
Copy from HDMI OUTPUT A
17
Copy from HDMI OUTPUT B
18
Copy from HDMI OUTPUT C
19
Copy from HDMI OUTPUT D
English