Publicité
Les langues disponibles
Les langues disponibles
User Manual
General
1.
Select RS-232 COM or TCP Control Mode
2.
Select RS-232 COM Port
3.
Click to Connect/Disconnect from the Matrix
(COM Mode)
4.
Select the Matrix IP address
5.
Click to Connect/Disconnect from the Matrix
(TCP Mode)
6.
Search Matrix IP address
Configure the Matrix' IP & MAC address'
7.
8.
Click to Factory Reset the Matrix
9.
Device Information display area
10. Click to Refresh Device Information and
Input/Output settings (Matrix tab)
11. Click to Clear Device Information
12. Enable/Disable the Matrix' Beep function
TCP Configuration
After clicking button 7 you will be presented with
the TCP Configuration menu:
1.
Choose from Auto (DHCP) or Static IP
2.
Enter the Matrix IP address (Static IP only)
3.
Enter the MAC address of the Matrix
EDID
The Matrix has 3 methods to set the EDID mode.
Set mode, Copy mode and Open EDID mode.
Set Mode: Select the required EDID from the
1.
drop down menu, choose an Input and finally
click Set.
Copy Mode: Select which Output you want to
2.
copy the EDID from, then choose an Input
and finally click Set.
Open EDID Mode: Click the folder and
3.
navigate to the location where you have
saved the EDID File. Select the file, then
choose an Input and finally click Set.
Click the status button to refresh Input/EDID
4.
status
English
Publicité
