Lindy 38143 Manuel Utilisateur page 3

User Manual
Introduction
The LINDY HDMI & IR CAT6 Extender 4x4 Matrix supports the transmission of high definition video
(resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D*), multi-channel digital audio
and control via push button, IR, RS-232 and TCP/IP from four high definition sources to four remote
displays over a single CAT. 6 cable of up to 50m* for each output. Each of the 4 outputs is also
simultaneously mirrored on local HDMI output ports, perfect for monitoring outputs or for the creation of a
secondary local zone.
*Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or
introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D
source.
This flexible feature rich product has been designed to be used in a number of different applications, such
as:

Domestic HDMI Matrix system

Video/TV wall display and control

Security surveillance and control
Package Contents
 HDMI & IR CAT6 Extender 4x4 Matrix
 4 x HDMI & IR CAT6 Receivers
 12V DC 2.5A Multi County PSU (with Euro, US, UK & Australian/China AC connectors)
 4 x 5V DC 1A Multi County PSU (with Euro, US, UK & Australian/China AC connectors)
 4 x IR Emitter with 3.5mm connector
 5 x IR Receiver with 3.5mm connector
 4 x IR Remote Control (with CR2025 battery)
 RS-232 9 Pin Male/Female Cable
 Mounting Ears & Screws
 This Manual
Specification
 Extends HDMI 1.4 & IR signals via CAT. 6 UTP Cable
 Supports resolutions: 1080p24/30/50/60, 1080i, 720p, 576p, 480p
 4K 30Hz is only supported by EDID setting/cloning on local HDMI output ports
 Support for 3D Signals, including 1080p 3D according to HDMI 1.4
 Deep Colour capable: supports 30/36/48 bit colour depth
 Audio Formats: LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD
 Supports 20 – 60kHz IR Frequencies (Bi-directional: Rx to Tx or Tx to Rx)
 Maximum HDMI Cable length, 5m in/out
 Preset or Cloned EDID can be used independently on each port
 Each Output (A-D) supports simultaneous output over HDMI & CAT6
 Transmitter/Matrix ports: 4 x HDMI Type A In, 4 x HDMI Type A Out, 4 x CAT6 Out, 4 x 3.5mm IR In, 4
x 3.5mm IR Out, IR Ext In 3.5mm, DC Socket, RS232 & RJ45 (TCP/IP)
 Receiver ports: HDMI Type A Out, 1x CAT6 In, 3.5mm IR In, 3.5mm IR Out, Coaxial SPDIF Out & DC
Socket
 Supports RS-232, remote control, on-panel control and TCP/IP Control
 Power consumption: 23W Maximum, 0.5W standby

Commercial advertising, display and control

University Lecture hall display and control

Retail Sales and demonstration
English