Aventics MC Série Mode D'emploi page 49

Valve position 1 2
GND Pin a1 a2
Solenoid/ Pin b1 b2
LED 12
Solenoid/ Pin c1 c2
LED 14
1 2 3 4 5 6 7 8 9
a
b
c
Fig. 5: Mating plug assignment
Mating plug assembly
AVENTICS | MC | 1987765452–BDL–001–AE
W
The crimped contact connections fit wire cross-sections of
0.14 ... 0.56 mm
W
Please only use multiple-strand cables with an external
insulation diameter from 9.0 to 15.5 mm; use the appropriate
mating plug sealing element to ensure that the IP 65 degree of
protection and the strain relief are guaranteed.
3 4 5 6 7
a3 a4 a5 a6 a7
b3 b4 b5 b6 b7
c3 c4 c5 c6 c7
1. Select a suitable sealing element and insert it into the
mating plug's terminal fitting:
red:
white:
2. Push the terminal fitting and mating plug casing over the
cable.
3. Remove about 5 cm of the cable sheath. Remove about
5 mm of insulation from the strands and mark them
according to their assignment and function.
4. Crimp the plug connections to the single cable strands.
5. Click the plug connections into the socket body according to
the assignment.
2
.
8 9 10 11 12
a8 a9 a10 Reserved, do not assign!
b8 b9 b10 b11 b12 b13 b14 b15 b16
c8 c9 c10 c11 c12 c13 c14 c15 c16
10 11 12 13 14 15 16
cable Ø
cable Ø
49
Installation
13 14 15 16
a
b
c
9.0 ... 13.0 mm
11.5 ... 15.5 mm