Aventics MC Série Mode D'emploi page 46

46 AVENTICS | MC | 1987765452–BDL–001–AE
Installation
Mounting on the DIN rail,
DIN EN 60715, 35x15
See Fig. 3
A
A
Fig. 3: Mount valve system onto DIN rail and secure using mounting kit
The valve system can be mounted on a DIN rail
(DIN EN 60715, 35×15).
Mount the valve system so that it cannot detach from the
DIN rail when the locking screw is released.
In order to get a secure hold on the DIN rail, the valve system is
secured on both sides using a mounting kit (bolts and nuts).
2.5–3.0 Nm
SW3
A-A