Spare Parts List - Storch 120 Compact Mode D'emploi

Valve soiled or clogged
• Pressure gauge does not show full pressure
• The high pressure hose vibrates
• Water exits intermittently
• Valves can become clogged if you have not used the
device for an extended period
1. If a valve is clogged,
2. the manometer will show little or no pressure
3. or the high pressure hose will vibrate
4. Use a ring spanner to open the valve
5. and remove the valve screw, the valve and the rubber
ring
6. bend a paper clip to the right shape ...
7. and use it to remove the dirt from the valve
• the inside valve must be closed
8. Water can escape at these three points. Push the
rubber seal back in tight
9. re-tighten the valve screw!
10. and repeat this for all 6 valves
11. This is how quickly you can eliminate the fault
Valve housing
Translation of the original instruction 56