Technical Specifications; Technical Data; Appliance Description / Function; Water And Cleaning/Care Agent System - Storch 120 Compact Mode D'emploi

Technical specifications

Working pressure, infinitely variable
Permissible overpressure
Water volume flow
Hot water infeed
Suction height
High pressure hose
Rated load
Output
Weight (without options)
Nozzle size
Sound power level
Recoil at lance
Vibrations at lance
All information is without guarantee! Subject to technical modifications and errors!

Appliance description / Function

1. Infeed water coupling with filter
2. Suction hose with filter strainer (optional accessories)
3. High pressure pump
4. Manometer
5. Pressure control valve / safety valve
6. High Pressure Hose
7. Spray gun

8. Spray gun with wash lance

Water and cleaning / care agent system
Water can be fed under pressure to the high pressure
pump, or drafted directly from a non-pressurized contai-
ner. The water is then fed by the high pressure pump at
pressure to the washing lance. The nozzle on the washing
lance creates a high pressure jet.
Spray gun with wash lance
The spray gun allows operation of the machine only when
the safety shifting lever is actuated.
Actuating the lever opens the spray gun. The water is
then pumped to the nozzle. Spraying pressure is built up
and quickly reaches the selected working pressure.
Releasing the shifting lever closes the gun and prevents
water escaping from the water lance. The pressure sur-
ge on closing the gun opens the pressure control safety
valve and the pump feeds water to the wash lance at the
selected working pressure.
The spray gun is a safety appliance. Repairs
must be performed by qualified and authorised
experts. If you need replacement parts, use
manufacturer approved parts only.
30 - 120 bar
135 bar
10 l / min at 2,800 rpm
up to 60° C
1 m
10 m
230 V / 50 Hz, 11 A
2,500 W
23 kg
20042
measured: 71 dB (A)
warranted: 91 dB (A)
approx. 27 N
1.9 m/s
2

Pressure control safety valve

The pressure control/safety valve protects the machine
against impermissible high pressure and is constructed
so that it cannot be set to a level above the permissible
operating pressure. The limiter nut on the wheel is sealed
with lacquer.
You can actuate the wheel to set the working pressure
and injection volume infinitely.
51
Water
Replacements, repairs, resetting and sealing
must be performed by qualified and authorised
experts.
Translation of the original instruction