Intended Use; Start-Up And Use; Spare Parts - Storch Trolley Mode D'emploi

5. Intended use

The pressure sprayer is suitable for applying wallpaper solvent concentrate with water.
Spraying the perforated wallpaper softens the paste again and makes it easier to remove
the old wallpaper from the wall.
The device must not be used for applications other than those described.

6. Start-up and use

Unscrew the pump unit (2) from the tank (1) and fill with the liquid to be sprayed. The
maximum fill quantity must not be exceeded. (Maximum fill quantity of 12 litres).
Screw the pump unit back into the tank and pump approx. 25 x to build up the pressure in
the tank. Pull the pressure control valve (3) briefly and check whether air escapes.
Aim the lance at the object to be sprayed and then pull the trigger (4). The spray jet can
be regulated by turning the nozzle (5).
If the spray jet becomes weaker, the tank pressure can be built up again by pumping
again.
After finishing the work, release the tank pressure by pulling the pressure control valve
(3). Once the air has completely escaped, unscrew the pump unit (2) from the tank (1)
and empty the remaining liquid.
To clean the device, fill with clear water and thoroughly rinse the entire device.

7. Spare parts

Pump unit:
Lance incl. hose:
48
60 65 37
60 65 36
Translation of the original instruction