Pressure Adjustment; Pressure Settings; Decommissioning; Safety Precautions - Storch 120 Compact Mode D'emploi

Pressure adjustment

By turning the wheel. Maximum pressure is pre-set.

Decommissioning

1. Switch off the device
2. Shut off the water supply
3. Open the gun briefly to relieve the pressure
4. Clean the gun
5. Disconnect the water hose and high pressure hose
6. Drain the pump: run the engine for approx. 20
seconds
7. Disconnect power cord from outlet.
8. Winter: Store the pump in a frost-free room
9. Clean the water filter
That is forbidden!
Children must not work with
the high pressure cleaner!
Never point the water jet at
people or animals!
Never clean the device with
high pressure or a water jet!
Translation of the original instruction
Do not damage the cable or
repair incorrectly!
Do not direct the water jet
against sockets!
Never pull the HP hose if it is
looped or kinked! Never pull
the hose over sharp edges!
54