Table Des Matières; Specification; M/S - Triton TRP UL Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the tool read and fully understand this manual.
Contents

Specification

Part no:
Voltage:
Power:
Variable Speed:
Blades:
Planing Width:
Depth of Cut Range:
Left or Right Chip Exit:
Bevelling V Grooves:
Parking Stand:
Net Weight:
Noise and Vibration Information:
Sound Pressure L
:
PA
Sound Power L
:
WA
Uncertainty K:
Weighted Vibration a
(main handle):
h
Weighted Vibration a
(auxiliary handle):
h
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary
As part of our ongoing product development, specifications of Triton products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear protection is correctly fitted and provides the correct level of sound attenuation for
the level of sound produced by your tool.
GB
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may be useful to domestic users who use tools for long periods
of time.
2
Original Instructions
2
3
4
4
EU: 220-240V~ 50/60Hz
SA: 220-240V~ 50/60Hz
AU: 220-240V~ 50/60Hz
JP: 100V~ 50/60Hz
USA: 120V~ 60Hz
EU: 750W
SA: 750W
AU: 750W
JP: 6.5A
USA: 6.5A
5000 - 15,500min
82mm (3
0 - 3mm (0 -
Yes
1
Automatic
3.9kg / 8.6lbs
87.1dB(A)
98.1dB(A)
3dB(A)

9.326m/s

1.5m/s

-1
") standard
1
4
")
1
4
1
")
8
2
2
2
5
6
8
9

Publicité

Table des Matières
loading

Table des Matières