Installation Bt6002 (Autonomous Wired); Important - Bodet BT6002 Manuel D'installation Et D'utilisation

VII - Installation BT6002 (Autonomous Wired)
IMPORTANT: solution available only with the BT6000 version of the shot clock keyboard.
1/ Connect the shot clock keyboard to the DIN plug of the spliting cable.
2/ Connect each BT6002 at the other ends of the spliting cable.
3/ Connect the power cords of the BT6002.
Nota 1 : The horn is present on only one BT6002 panel.
Nota 2 : The control cables of the 2 BT6002 are of different length. (see illustration).
Fuse
BT6002
230V AC
To use the panels standing on
the ground,mount the bracket
on the back of the panel
BT6002
Spliting
cable Shot clock keyboard
230V AC
21