Child Lock - Steba IK 650 Slim Mode D'emploi

Child lock

∙ Press the button
∙ In order to unlock, press the button
Troubleshooting
Dear Client,
Thank you for buying this high-quality STEBA product. The following table will help
you with problems that may occur when using your device. For many problems there
is a simple solution, because not everything that appears like a malfunction must be
serious. Please check the following list before sending the complete device to the
customer service for inspection.
Problem
No light after plug-in of
the device
A signal tone sounds and
no heat occurs
Plate does not heat any-
more
Error code „E0"
Error code „E1"
Error code „E2"
Error code „E3"
Error code „E4"
Error code „E5"
Error code „E6"
Error code „E7"
. All buttons, except on/off are locked.
Reason
∙ No power
∙ To many devices at one
power cord
∙ Pot is not in the middle
of the plate
∙ Pot not suitable for
induction
∙ Timer run out
∙ Internal electronic error
∙ No or unapproriate
cookware
∙ Internal overheat
∙ Over-voltage
∙ Under-voltage
∙ Error in the tempera-
ture sensor
∙ Error in the IGBT sensor
∙ Top plate overheat
for some seconds.
Solution
∙ Check is plug is
∙ Check the fuse
∙ Min. diameter of 12cm
∙ Use suitable cookware
∙ Set a new time
∙ Contact service
∙ Check cookware
∙ Let device cool down
∙ Check cookware
∙ Let device cool down
∙ Contact service
∙ Contact service
∙ Contact service
∙ Contact service
∙ Check cookware
∙ Let device cool down
plugged-in correctly
and restart
and restart
and restart
13