Steba IK 650 Slim Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The glass surface can have a residual heat after cooking.
.
∙ Attention! Do not place hot pots or pans onto the con-
trol panel! Not warranty payments!
∙ Do not carry the unit when the pot or the pan is on it.
∙ Do not use the device if unsupervised. Oil and fat can
catch fire if they get too hot.
∙ Do not place near objects which are affected by magnet. (e.g.
automatic-banking cards).
∙ Unplug the device after every use (not if built-in!)
Attention!
Device gets hot!
Risk of burns!
∙ While using the device, the surface can get very hot. Don´t
place the device on a sensitive surface (c.g. painted furniture)
and keep distance of at least 70 cm to burnable materials (e.g.
curtains).
Cleaning
∙ Clean after every use
∙ Unplug the device and wait until cooled down.
Never immerse the device into water and never run water
over the unit. Pay attention that no liquids can get into
the device through the air inlets.
∙ A discoloration or storing can be caused if pots are used which
are not clean at the bottom.
∙ Use a damp cloth and some detergent for cleaning.
∙ Do not use any abrasive milk, polishing wool or solvent for clea-
ning.
∙ Use vacuum cleaner to suck up dirt from the air intake and ex-
haust vent.
11

Publicité

Table des Matières
loading

Table des Matières