Connecting The Door Station; Adjusting The Speaker Volume - SOMFY Visiophone V100 Notice D'installation

V100 video entry phone

3.3 Connecting the door station

3.3.1 To a Somfy gate motorisation
[1]. Switch off the power supply.
[2]. Remove the cover from the control cabinet or from the motor containing the electronics.
[3]. On motorisations equipped with electronics represented in the view on the left, connect the dry contact output (COM and NO) on the
door station to terminals 3 and 4 (yellow "BUS" label) on the motorisation electronics.
On motorisations equipped with electronics represented in the view on the right, connect the dry contact output (COM and NO) on the door station to
terminals 5 and 3 on the motorisation control box to open the main gate or to terminals 6 and 3 to open the pedestrian gate.
Note: To connect the door station to another brand of gate motorisation, please refer to the installation guide for that motorisation.
COM
NO
Door station
3.3.2 To a door-opener/electric lock
Connect the door station output
accordance with the diagram.
Observe the +/- polarity if indicated in the door-opener/lock
instructions.

3.4 Adjusting the speaker volume

To adjust the door station speaker volume, use a screwdriver to turn
the button on the back of the door station:
• clockwise to increase the volume,
• anti-clockwise to reduce the volume.
Copyright © 2015 Somfy SAS. All rights reserved.
3
4
Motorisation
electronics
to the door-opener/lock in
Door station
EN
Motorisation
electronics
* not provided
800 mA max
*
Button to
adjust the
speaker
volume
4