Product Description And Specifications - Bosch GSL 2 Professional Notice Originale

OBJ_BUCH-1545-005.book Page 13 Monday, December 10, 2012 11:06 AM
 When using a class 3R measuring tool, observe possi-
ble national regulations. Non-observance of these regu-
lations can lead to injury.
 Make sure that the area of laser radiation is monitored
or shielded. The limitation of laser radiation to controlled
areas prevents eye damage to persons not involved.
 Before any work on the measuring tool itself (e.g. as-
sembling, maintenance, etc.) as well as when trans-
porting and storing, remove the battery pack or the
batteries from the measuring tool. Danger of injury
when accidentally actuating the On/Off switch.
 Do not open the battery pack. Danger of short-circuiting.
Protect the battery pack against heat, e.g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
 When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery pack; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery pack may cause irritations or burns.
 In case of damage and improper use of the battery
pack, vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The vapours
can irritate the respiratory system.
 Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
 Use the battery pack only in conjunction with your
Bosch measuring tool. This measure alone protects the
battery pack against dangerous overload.
 Use only original Bosch battery packs with the voltage
listed on the nameplate of your measuring tool. When
using other battery packs, e.g. imitations, reconditioned
battery packs or other brands, there is danger of injury as
well as property damage through exploding battery packs.
Keep the measuring tool and the laser
target plate 10 away from cardiac pace-
makers. The magnets of the measuring tool
and laser target plate generate a field that
can impair the function of cardiac pace-
makers.
 Keep the measuring tool and the laser target plate 10
away from magnetic data medium and magnetically-
sensitive equipment. The effect of the magnets of the
measuring tool and laser target plate can lead to irreversi-
ble data loss.
Bosch Power Tools
Remote Control (GSL 2 Set)
Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.
 Have the remote control repaired only through a quali-
fied repair person and only using identical replacement
parts. This will ensure that the functionality of the remote
control is maintained.
 Do not operate the remote control in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the remote con-
trol which may ignite the dust or fumes.
Product Description and
Specifications
While reading the operating instructions, unfold the graphics
page with the illustration of the surface laser and the remote
control, and leave it open.
Intended Use
Surface laser
The measuring tool is intended for checking the flatness of
floor surfaces.
The measuring tool is suitable for indoor use.
Remote Control (GSL 2 Set)
The remote control is intended for controlling surface lasers
indoors.
Product Features
The numbering of the product features refers to the illustra-
tion of the surface laser and remote control on the graphics
page.
Surface laser
1 Exit opening for laser beam
2 Laser warning label
3 Handle
4 Reception lens for remote control (GSL 2 Set)
5 Battery status indicator
6 Latch of battery lid
7 Battery lid
8 On/Off switch
9 Thumbwheel for height adjustment
10 Laser target plate
11 Measuring tip of the laser target plate
12 Serial number of the surface laser
23 Battery pack*
Remote Control
13 Outlet opening for infra-red beam
14 Button for fast rotation in anticlockwise direction
15 Button for slow rotation in anticlockwise direction
16 Button for step-by-step rotation in anticlockwise direction
English | 13
1 618 C00 75G | (10.12.12)