Product Description And Specifications; Product Features; Technical Data; Inserting/Changing The Batteries - Bosch GLL 2-15 G Professional Notice Originale

Do not let children use the laser measuring tool unsu-
u
pervised. They could unintentionally blind themselves or
other persons.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
Keep the magnetic accessories away from
implants and other medical devices, e.g.
pacemakers or insulin pumps. The magnets
in the accessories generate a field that can im-
pair the function of implants and medical
devices.
Keep the magnetic accessories away from magnetic
u
data storage media and magnetically-sensitive
devices. The effect of the magnets in the accessories can
lead to irreversible data loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) Battery indicator
(3) Button for laser operating mode
(4) On/off switch
(5) 1/4" tripod mount
(6) Battery compartment cover locking mechanism
(7) Battery compartment cover
(8) Laser warning label
(9) Serial number
(10) Holder (LB 10)
(11) 1/4" screw of the holder
(12) Magnet
(13) Screw hole of the holder
a)
(14) Ceiling clip (DK 10)
a)
(15) Tripod (BT 150)
(16) Telescopic shaft (BT 350)
a)
(17) Universal holder (BM 1)
a)
(18) Rotating mount (RM 10)
a)
(19) Laser goggles
Bosch Power Tools

Technical Data

The serial number (9) on the type plate is used to clearly identify your
measuring tool.
Assembly

Inserting/Changing the batteries

It is recommended that you use alkaline manganese batter-
a)
ies to operate the measuring tool.
Press the locking mechanism (6) upwards to open the bat-
tery compartment cover (7) and remove the battery com-
partment cover. Insert the batteries.
a)
(20) Laser target plate
a)
(21) Protective bag
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Line laser
Article number
A)
Working range
B)C)
Levelling accuracy
Self-levelling range
Levelling time
Operating temperature
Storage temperature
Max. altitude
Relative air humidity max.
Pollution degree according to
IEC 61010-1
Laser class
Laser type
C
6
Divergence
Tripod mount
Batteries
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width × height)
– Without holder
– With holder LB 10
Protection rating
A) The working range may be reduced by unfavourable environ-
mental conditions (e.g. direct sunlight).
B) At 20–25 °C
C) The values stated presuppose normal to favourable environ-
mental conditions (e.g. no vibration, no fog, no smoke, no direct
sunlight). Extreme fluctuations in temperature can cause devi-
ations in accuracy.
D) Only non-conductive deposits occur, whereby occasional tem-
porary conductivity caused by condensation is expected.
English | 13
GLL 2-15 G
3 601 K63 W..
15 m
±0.3 mm/m
±4°
< 4 s
–10 °C to +50 °C
–20 °C to +70 °C
2000 m
90%
D)
2
2
500−540 nm, < 10 mW
10
50 × 10 mrad (full angle)
1/4"
4 × 1.5 V LR6 (AA)
0.57 kg
126 × 63 × 115 mm
145 × 63 × 134 mm
IP 64
1 609 92A 7LW | (29.04.2022)