Features Of The Operator; Envisaged Use And Field Of Application; Technical Specifi Cations Of Versions Available; Installation Components - Aprimatic APRIBOX 600 Notice D'installation Et D'entretien

1. FEATURES OF THE OPERATOR

1.1

ENVISAGED USE AND FIELD OF APPLICATION

The APRIBOX electro-mechanical operator is designed to move (open and close) roller shutter doors and up-and-over
doors with a counter-weight and maximum height of 2.5 m for residential use.
All other uses are considered improper and therefore hazardous.
All other uses are forbidden by Aprimatic.
Caution
• Only use the product for the permitted uses specifi ed. Do not use the product for purposes other than those specifi ed.
• Do not tamper with or modify the product.
• The product must only be installed using APRIMATIC accessories.
• The operator does not form part of the support or safety system of the door. The door should already have
adequate safety and support features.
1.2 TECHNICAL SPECIFICATIONS OF VERSIONS AVAILABLE
tab.1 - Technical specifications
Power supply
Motor voltage
MAX accessory power supply current
Tractive force
Max door panel surface
Noise level
Stroke
Speed
Operating temperature
1.3 INSTALLATION COMPONENTS (fi g.1-a and 1-b)
Roller shutter doors
Motor unit
Chain holder guide
Drive rod with door mounting kit
Special arm (accessory for up-and-over doors)
Carriage
Magnetic limit switch with 2 magnets
Release cable
Key release device (OPTIONAL)
Technical specifi cations / Components / Dimensions
APRIBOX 600
230 V AC 50Hz
24 V DC
600mA
600 N
2
8 m
< 50 db
MAX 245 cm
0.1 ~ 0.2 m/s
-20°C ÷ +60°C
Up-and-over doors
fig.1-a
- 15 -
APRIBOX 800
800 N
2
10 m
fig.1-b