Preparing The Power Supply - Sony PVP-MSH Mode D'emploi

Preparing the power supply

Be sure to use a fully charged battery, the AC power adaptor or the AC
power adaptor/charger.
Printing is not possible if the battery is low. However, recording may be
possible depending on how much the battery power remains. The
remaining battery time indicator does not indicate the possible printing
time.
If you press PRINT or insert the print paper while the battery is low, the
warning indicator, E, will be displayed on the LCD screen. Replace with a
fully charged battery.
1
Set the POWER switch on your camcorder to MEMORY.
2
Slide the printer cover in the direction of the arrow to open
while holding your camcorder.
The POWER lamp lights, the sound of motor operation stops, and the
PAPER lamp flashes slowly after several seconds.
PAPER lamp
POWER lamp
PNote
While recording or playback mode, this unit cannot be turned on.
12-US
Printer cover