Flashes Per Minute - SKF TKRS 21 Mode D'emploi

4.1 Flashes per minute

After the starting the instrument, the stroboscope is by default in the mode
"FPM" (flashes per minute).
Fig. 5 – Flashes per minute (FPM)
The flash rate can be changed by rotating the wheel (button 3).
To quicker find the right flash rate, the rate of change can be influenced by
A. Toggling the adjustment speed by pressing button 2.
B. the speed of rotating the wheel (button 3). Faster rotations have a faster
change rate, while slower rotations allow precise adjustments.
The change rate for fast adjustments can be customised in the settings.
Adjust flashing rate by
scrolling the wheel
Scrolling speed can be
toggled between fast and slow
by pressing button 2
13
EN