Introduction; Unpacking And Inspection; Operation; Meter Setting: Set (See Fig.2) - Amprobe TMA40 Mode D'emploi

INTRODUCTION

This meter is designed with three measurement modes:
1. Single point measurement
2. Multiple points measurement (Manual record)
3. Automatic logging
• Measuring/programming anywhere at any time
• User friendly interface
• RS232 cable and software enable to link with pC for downloading and uploading
• backlight function
• Tripod mountable for long time use
• power off time selectable
• big dot matrix lCd
• powered by 4-pcs AAA batteries or 9V adaptor (not included) (plug: outer:5.5mm;
inner:2.1mm; Center positive) 0.05mA minimum

UNPACKING AND INSPECTION

Your shipping carton should include:
1 x TMA40 Airflow Anemometer
4 x AAA battery
1 x RS232 Cable
1 x Cd download Suite
1 x Carrying case

OPERATION

Meter setting: SET (See Fig.2)

• press f4 to enter the meter setting
• press or key to shift the cursor
• press ediT to enter modification mode
• press nexT/bACK to enter the next or previous page.
• press exiT to return to main menu.
Meter Screen Description (See Figs 2&3)
1. lCd Cont.(1-5): lCd brightness. from darkest 1 to brightest 5.
2. Auto off: Selectable 1 to 20 minutes.
3. Set clock: Choose date and time. press ediT to enter the month. press nexT to accept or
AboRT to cancel. Repeat for day, year, hour, minute and second.
4. Set id: press ediT to enable or disable id.
5