Introduction; Unpacking And Inspection; Operation; Meter Setting: Set (See Fig.2) - Amprobe TMA40-A Mode D'emploi

Find Quality Products Online at:

INTRODUCTION

This meter is designed with three measurement modes:
1. Single point measurement
2. Multiple points measurement (Manual record)
3. Automatic Logging
• Measuring/programming anywhere at any time
• User friendly interface
• USB cable and software enable to link with PC for downloading and uploading
• Backlight function
• Tripod mountable for long time use
• Power off time selectable
• Big Dot matrix LCD
• Powered by 4-pcs AAA batteries or 9V adaptor (not included) (Plug: outer:5.5mm;
Inner:2.1mm; Center positive) 0.05mA minimum

UNPACKING AND INSPECTION

Your shipping carton should include:
1 x TMA40-A Airflow Anemometer
4 x AAA Battery
1 x USB Cable
1 x CD Download Suite
1 x Carrying case

OPERATION

Caution
For indoor use only. Do not use under the sunlight.

Meter setting: SET (See Fig.2)

• Press F4 to enter the meter setting
• Press or key to shift the cursor
• Press EDIT to enter modification mode
• Press NEXT/BACK to enter the next or previous page.
• Press EXIT to return to main menu.
Meter Screen Description (See Figs 2&3)
1. LCD Cont.(1-5): LCD brightness. From darkest 1 to brightest 5.
2. Auto Off: Selectable 1 to 20 minutes.
3. Set clock: Choose date and time. Press EDIT to enter the month. Press NEXT to accept or
ABORT to cancel. Repeat for day, year, hour, minute and second.
4. Set ID: Press EDIT to enable or disable ID.
GlobalTestSupply
www.
5
.com
sales@GlobalTestSupply.com