Pioneer HD-V9000 Mode D'emploi page 47

 Other settings (Options)
Setting item Settings
Year/Month/Day/
1
Hour/Minutes/
Clock Setting
Seconds
Enable
Front Key
Disable
Single
3
File Play Mode
All
Off
3
Repeat Mode
On
9Pin
Serial Port
15Pin
2400
4800
Baud Rate
9600
19200
Standard
Extend Terminal
User
Disable
Auto Power Off
Enable
3
No/Yes
Initialize
1. This cannot be set when NTP is set to Enable (page 49).
2. • The LCD button always operates (remains unlocked), regardless of the Front Key setting.
• To temporarily unlock operation of the buttons on the main unit's front panel, press the LCD, ENTER and RETURN buttons on the front
panel simultaneously for over one second. This only enables operation temporarily, and does not change the Front Key setting.
3. This cannot be changed during playback.
4. The 9-pin and 15-pin connectors cannot be used simultaneously for RS-232C signal transfer.
5. The following settings are restored to the defaults set upon purchase.
• All Video Settings items
• All Audio Settings items
• The following Network Settings items
– Network Connection
– Type
– Wakeup On LAN
– NTP
• All Initial Settings items aside from Clock Setting.
Description
Sets the date and time of this unit's internal clock.
Unlocks operation of the buttons on the main unit's front panel.
Locks operation of the buttons on the main unit's front panel.
The stop mode is set after one file is played to the end.
When playback of one of the video files in the video folder on the SD memory card is
finished, the next file in the sorted order is played.
Playback is not repeated.
The file(s) is (are) played repeatedly. (Which files are played depends on the File Play Mode
setting.)
Select this when connecting a computer to this unit's RS-232C terminal using a 9-pin cross
cable (commercially available).
Select this when connecting a computer to this unit's EXT TERMINAL connector.
Sets the RS-232C terminal's transfer rate to 2 400 bps.
Sets the RS-232C terminal's transfer rate to 4 800 bps.
Sets the RS-232C terminal's transfer rate to 9 600 bps.
Sets the RS-232C terminal's transfer rate to 19 200 bps.
Sets the EXTEND TERMINAL button function to the preset standard.
Sets the EXTEND TERMINAL button function to the desired value (page 67).
The power does not turn off automatically even if no operation is performed for the specified
time.
The power turns off automatically (is set to standby) if no button is operated or there is no
command control or access from the LAN for over 2 hours when no SD memory card is
loaded.
When Yes is selected, this unit's settings are restored to the defaults set upon purchase.
Turn the power off then back on.
2
4
5
06
47
En