Measuring The Sd Memory Card's Transfer Speed - Pioneer HD-V9000 Mode D'emploi

Measuring the SD
05
memory card's
transfer speed
The speed at which data on the SD memory card is read
into this unit can be measured.
Caution
• This SD memory card transfer speed is only a rough
measurement, and does not guarantee a playback bit
rate.
• To achieve stable playback operation, use SD memory
cards with a sufficiently high transfer speed with
respect to the playback bit rate.
1 Switch to the transfer speed measurement mode.
Press the SETUP button on the main unit's front panel or
on the remote control for over one second.
2 Start the measurement.
Press the ENTER button. The following appears on the
main unit's display:
S D S p e e d
E N T E R
T e s t i n g .
When the measurement is completed, the results are
displayed in the order minimum value  average value
 maximum value.
x x x / x x x / x x x
M i n A v
x x x / x x x / x x x
E N T E R :
x x x / x x x / x x x
R E T U R N
• Press the ENTER button to restart the measurement.
• Press the RETURN button to cancel the transfer
speed measurement mode.
• When a display is connected to the VIDEO OUT
terminal, the same contents can be checked on the
display's screen.
• If measurement is not possible, an error message
appears on the display. Check the SD memory card.
Ex.: When write-protected
WRITE PROTECT or FREE SPACE <100MB
• Several minutes are required to measure the transfer
speed.
44
En
T e s t
t o s t a r t
M b p s
e M
a x
M b p s
R e t e s t
M b p s
: E x i t
• Use SD memory cards in FAT16, FAT32 or NTFS
format. The measurement is possible even if files are
stored on the SD memory card.
• Check the results of the measurement against
Guaranteed transfer speed under Cautions on using
SD memory cards on page 21.
.