Mounting The Holder Frames - Miele professional A 306/1 Mode D'emploi

Mounting the holder frames

The holder frames are mounted above the nozzles on the upper cross
strut of the module, with 2 frames mounted on each side. The slanted
corners of the holder frames centre the measuring cylinders during
reprocessing. After mounting they must point downwards.
Position the holder frame on one of the side struts of the module.

The pins of the holder frame must reach around the strut of the
module. The frame must be facing outwards and the slanted
corners must be facing downwards .
Move the holder frame upwards onto the upper cross strut of the

module .
Hook the holder frame into one of the notches .

The frames must be mounted on each side in turn. Repeat the pro-

cess on the other side.
en - Installation
31